Frequently Asked
Questions
Real answers on cost, licensing, and process — from a licensed Clark County contractor who's completed 250+ local projects.
250+
Clark County Projects
$0
Cost for Your Estimate
Licensed
WA Contractor #NORBI**741CS
Flat Rate
You Know the Price Before We Start
Cost & Pricing
How much does a handyman cost in Clark County, WA?
For single tasks, most handyman jobs in Clark County run $150–$350. A half-day (4 hours, multiple tasks) is typically $300–$600, and a full day runs $550–$1,000. NORBILT gives you a flat price before we start — no hourly surprises.
How much does drywall repair cost in Vancouver, WA?
A small hole patch (under 6") runs $150–$300. Medium damage (6"–12") is $250–$450. A full wall repair or skim coat for a room is $800–$2,000 depending on size. Texture matching is included in every quote.
How much does a bathroom remodel cost in Clark County?
A cosmetic refresh (new fixtures, caulking, paint) runs $800–$2,500. A mid-range update with new tile, vanity, and lighting is $3,000–$7,000. A full remodel with demo, new tile floor, shower surround, and all fixtures is $8,000–$18,000. High-end custom work starts at $18,000+.
How much does flooring installation cost near Vancouver, WA?
LVP (luxury vinyl plank) installation runs $3–$6 per square foot installed. Hardwood flooring is $6–$12 per square foot installed, depending on species and pattern. Most living rooms run $1,500–$4,500 total.
Do you charge for estimates?
No. NORBILT provides free on-site estimates for all Clark County homeowners. We walk the job, assess what's needed, and give you a clear written price before any work starts. You know the cost before we touch anything.
Do you give a price upfront or charge by the hour?
We price by the job, not the hour. You get a flat written quote before work begins. We've completed 250+ projects across Clark County this way — no open-ended invoices, no surprises at the end.
Licensing & Insurance
Is NORBILT a licensed contractor in Washington State?
Yes. NORBILT is a licensed, bonded, and insured general contractor in Washington State. Our WA contractor license number is NORBI**741CS. We carry general liability insurance on every job.
Verify our license at Washington State L&I →Why does licensing matter for home repair in WA?
Washington State requires a contractor's license for repair work above $500. An unlicensed person doing electrical-adjacent, plumbing-adjacent, or structural work puts your home insurance at risk — if something goes wrong, your insurer can deny the claim. NORBILT is licensed for every job we take.
What's the difference between a handyman and a licensed general contractor?
In Washington, an unlicensed handyman is legally limited to jobs under $500. A licensed general contractor like NORBILT can legally handle larger repairs, remodels, and any work that requires permits. We do jobs that unlicensed handymen legally can't.
Are you insured if something gets damaged during the job?
Yes. NORBILT carries general liability insurance. If we damage your home during a project, you're covered. We can provide a certificate of insurance upon request before any work begins.
Service Area
What cities do you serve in Clark County?
We serve all of Clark County, WA — including Vancouver, Camas, Ridgefield, Battle Ground, Washougal, Brush Prairie, Felida, Hazel Dell, Salmon Creek, Five Corners, Orchards, Mill Plain, and Lake Shore. If you're in Clark County, we come to you.
Do you serve Battle Ground, WA?
Yes. Battle Ground is one of our most active service areas. We do drywall repair, handyman work, finish carpentry, flooring, and bathroom remodels in Battle Ground regularly. Free estimates available for all Battle Ground homeowners.
Do you work in Camas, WA?
Yes. NORBILT serves Camas homeowners with the same licensed, bonded service as our Vancouver clients. We handle kitchen remodels, tile work, trim carpentry, and general repairs across Camas and Washougal.
Do you work in Brush Prairie or Ridgefield?
Yes to both. Brush Prairie and Ridgefield are active service areas. We've done bathroom remodels, flooring installs, and handyman jobs throughout North Clark County. Free estimates for both areas.
Kitchen & Bathroom Remodeling
How much does a kitchen remodel cost in Vancouver WA?
A kitchen remodel in Vancouver WA costs $8,000–$80,000+ depending on scope. A mid-range remodel — new cabinets, quartz countertops, backsplash, and LVP flooring — runs $18,000–$35,000. A full gut remodel with layout changes runs $30,000–$55,000. Cosmetic updates (hardware, countertops only) start around $2,000. NORBILT gives you a written flat-rate price before we start.
How much does a bathroom remodel cost in Clark County WA?
A bathroom remodel in Clark County WA costs $900–$32,000+. A cosmetic refresh (new fixtures, caulk, paint) runs $900–$2,500. A mid-range remodel with new vanity, tile floor, and updated fixtures runs $3,500–$8,000. A full gut remodel — demo to studs, new tile, plumbing, vanity, exhaust — runs $9,000–$18,000. A primary suite remodel runs $18,000–$32,000+.
How long does a kitchen remodel take?
A kitchen remodel typically takes 4–7 weeks from demo to final walkthrough. The longest lead item is usually cabinets (2–4 weeks to fabricate and deliver) followed by countertop templating and fabrication (5–10 days after cabinets are set). Active work on-site runs 2–3 weeks. NORBILT provides a week-by-week timeline at the estimate.
How long does a bathroom remodel take?
A cosmetic bathroom refresh takes 1–2 days. A mid-range remodel with new vanity, tile, and fixtures takes 3–6 days. A full gut remodel takes 1–2 weeks. A primary suite remodel takes 2–4 weeks. Tile work requires curing time between setting and grouting, which affects the schedule.
Do I need a permit for a kitchen or bathroom remodel in Clark County?
You need a permit in Clark County if your remodel involves moving or adding plumbing, adding new electrical circuits, structural changes (removing a wall, enlarging a window), or mechanical changes (new exhaust duct). Cabinet replacements, vanity swaps, and tile work in the same location typically don't require a permit. NORBILT handles all permitting for any permitted scope — fees are included in the bid.
What's the difference between a kitchen remodel and a kitchen renovation?
In practice, they mean the same thing — both refer to updating or replacing components of a kitchen. NORBILT uses 'remodel' to describe projects that replace functional components: new cabinets, countertops, flooring, fixtures, or layout changes. A 'refresh' or 'facelift' typically means cosmetic changes only — new hardware, paint, appliances — without touching the cabinets or countertops.
Does NORBILT do tub-to-shower conversions?
Yes. Tub-to-shower conversions are one of our most requested bathroom remodel services. A prefab insert conversion runs $1,800–$4,500. A custom tile shower conversion runs $3,500–$8,500. The project includes removing the tub, modifying the drain if needed, installing the new shower base or custom tile pan, walls, and fixtures. Most conversions take 2–4 days.
What kitchen remodel projects add the most resale value in Clark County?
In Clark County, mid-range kitchen remodels — new cabinets, quartz countertops, updated fixtures — consistently deliver the best ROI for resale. Full gut remodels have high impact but longer payback periods. The projects with the least ROI are high-end custom kitchens in mid-range neighborhoods where the home doesn't support premium finishes at appraisal.
Process & What to Expect
How does the estimate process work?
You contact us, we schedule a free walkthrough at your home, assess the scope, and send you a written quote — usually within 24 hours. Once you approve, we schedule the work. No deposits until the quote is accepted, and no payment in full until the job is done.
How long do most jobs take?
Small handyman tasks take a few hours. Drywall repairs typically take 1–2 days (including dry time). Bathroom remodels run 3–10 days depending on scope. Flooring for a living room or bedroom is usually 1–2 days. We give you a timeline at the estimate so you can plan around it.
Do I need to be home during the work?
For the estimate, yes. For the actual work, it depends on the project — many clients give us a key or code. We treat your home with respect and clean up at the end of every work day.
What if the project scope changes mid-job?
We tell you immediately. If we open a wall and find water damage or unexpected conditions, we stop, show you what we found, and get your approval before doing any additional work. No surprise charges added to the final invoice.
Do you pull permits for remodel work?
For work that requires a permit in Clark County — structural changes, certain electrical or plumbing-adjacent work — yes, we handle permit pulling as part of the project. We'll tell you upfront if a permit is required and factor it into the quote.
Still Have Questions?
Every job is different. Contact us and we'll walk your home, assess the scope, and give you a clear written price — free, no obligation.