Finish Carpentry Cost in Battle Ground WA
2026 prices for baseboard installation, crown molding, door casing, and wainscoting — from a licensed contractor working in Battle Ground every week.
Quick Answer
Finish carpentry in Battle Ground WA costs $2.50–$16.00 per linear foot depending on profile and material.
A full baseboard replacement for a 3-bedroom home runs $900–$2,300 installed. Crown molding for a living room runs $320–$760. A full trim package — baseboards, crown, and door casings throughout — runs $3,500–$9,000+.
2026 Finish Carpentry Costs — Battle Ground WA
All prices include labor and materials at current Clark County rates.
| Item | Unit | Cost Range |
|---|---|---|
| Baseboard installation — paint-grade MDF | per linear ft | $2.50 – $4.50 |
| Baseboard installation — solid wood (pine/poplar) | per linear ft | $4.00 – $7.00 |
| Crown molding — standard profile | per linear ft | $5.00 – $9.00 |
| Crown molding — built-up (multi-piece) | per linear ft | $9.00 – $16.00 |
| Door casing (one opening, both sides) | per door | $150 – $320 |
| Window casing (one window) | per window | $120 – $280 |
| Wainscoting — MDF/paint-grade panels | per sq ft | $6.00 – $11.00 |
| Chair rail only | per linear ft | $3.00 – $5.50 |
| Stair railing — repair or replace | per section | $300 – $800 |
Common Project Totals
All-in estimates for typical Battle Ground finish carpentry projects.
| Project | Total Cost |
|---|---|
| Single bedroom baseboards | $175 – $380 |
| Full house baseboards (3 bed / 2 bath) | $900 – $2,300 |
| Living room crown molding | $320 – $760 |
| Whole-house crown molding (main floor) | $1,050 – $3,250 |
| Dining room wainscoting | $525 – $1,350 |
| All interior door casings (8 doors) | $1,200 – $2,600 |
| Full remodel trim package | $3,500 – $9,000+ |
What We See by Battle Ground Neighborhood
Battle Ground Town Center & Historic Areas
Older homes from the 1940s–1970s with original fir or pine trim. Replacement matching is an option, but most homeowners choose to upgrade to a cleaner contemporary profile. Baseboard heights tend to run 3–3.5" on these homes — upsizing to a 4.5" or 5.25" profile makes a visible difference. Budget for additional prep work on walls that weren't built to modern tolerances.
1990s–2000s Subdivisions (NW Battle Ground)
The most common housing stock we work in. Builder-grade 2.25" colonial baseboards that are brittle, chipped at corners, and don't photograph well. A full baseboard replacement to a taller colonial or craftsman profile is a high-ROI project here — material cost is low and the visual impact is significant.
Newer Custom Homes (2010s–Present)
Higher-end homes with taller ceilings that benefit from built-up crown molding and wider baseboards (5.25"–7.25"). Wainscoting in dining rooms and primary suites is a common add-on during construction completion or before the first sale. Finish level expectations are higher — we use a nail gun with hand-set finishing and caulk before painting.
Rural Properties & Acreage Homes
Older farmhouses and rural builds on larger lots often have a mix of trim styles accumulated over decades. These are good candidates for full trim standardization — removing mismatched profiles and installing consistent baseboards and casings throughout. Expect some surprises behind old trim (moisture, pest damage) on homes over 40 years old.
What Drives Finish Carpentry Cost in Battle Ground
Profile Height and Complexity
A 2.25" colonial base costs half as much as a 5.25" craftsman base — not because the linear footage changes, but because taller profiles require more material and more precise mitering at corners. Built-up profiles (layering a base cap on top of a base board) multiply the cost because each piece must be cut and fitted independently.
Ceiling Height
Standard 8-foot ceilings are straightforward. 9-foot and 10-foot ceilings require scaffolding or taller ladders, and crown molding cuts become more complex as the room gets larger. Vaulted ceilings require custom angle cuts that add significant time per corner.
Wall Condition
Out-of-square walls (common in 1990s and older Battle Ground homes) require scribing the trim to fit the wall rather than relying on a simple miter cut. This adds 20–40% to the time on older homes. New construction with straight, plumb walls is the fastest and cheapest to trim.
Removal of Existing Trim
If existing trim is being replaced, demo and disposal is included in our quote. If existing trim was painted with thick latex over the years (as is common in 1990s homes), removal without damaging the drywall face takes more time.
Priming and Paint
Most finish carpentry quotes cover installation and caulking only — paint is separate unless specified. If you want us to prime and paint as part of the project, add $1–$2 per linear foot for paint-grade work. Pre-primed MDF is standard; unprimed solid wood requires an extra prime coat before topcoat.
Scope Efficiency
A whole-house trim project is more cost-effective per linear foot than a single room because setup, material delivery, and shop time are amortized across more work. If you're thinking about trim in one room, it often makes sense to quote the whole house — the per-foot price usually drops meaningfully at larger scope.
What's Included in a NORBILT Finish Carpentry Quote
Every finish carpentry project includes:
Material supply
Trim profile, nails, construction adhesive, caulk — all included unless owner-supplied is requested
Removal of existing trim
Demo and disposal of old baseboards or casings as part of the scope
Precision miter cuts
Inside corners coped, outside corners mitered — no biscuit joints or butt joints at corners
Nail set and fill
All nail holes filled before handoff — ready for paint
Caulk lines
Top edge of baseboard caulked to wall — the step most DIYers skip that separates a professional finish from a good-enough one
Final cleanup
Sawdust, trim scraps, and packaging removed at end of project
Need a finish carpentry quote in Battle Ground?
View our full finish carpentry service — scope, materials, process, and warranty for Clark County homeowners.
Finish Carpentry FAQ — Battle Ground WA
How much does baseboard installation cost in Battle Ground WA?
Baseboard installation in Battle Ground WA costs $2.50–$4.50 per linear foot for paint-grade MDF and $4.00–$7.00 per linear foot for solid wood. A typical 3-bedroom home has 350–500 linear feet of baseboard, putting a full-house replacement at $900–$2,300 installed. Prices include supply, installation, and caulking. Paint is separate unless quoted together.
How much does crown molding cost in Battle Ground WA?
Crown molding installation in Battle Ground WA costs $5.00–$9.00 per linear foot for a standard single-piece profile and $9.00–$16.00 per linear foot for built-up multi-piece profiles. A living room with 60–80 linear feet of crown runs $320–$760 installed. Rooms with vaulted ceilings or complex angles cost more due to the additional cutting and fitting time.
Is finish carpentry worth it before selling a home in Battle Ground?
Yes — especially for 1990s–2000s builder homes with thin colonial baseboards and hollow-core door casings. Replacing trim is one of the highest-ROI cosmetic investments because the material cost is low and the visual impact in listing photos is immediate. A full baseboard replacement on a 1,800 sq ft home typically costs $1,200–$2,000 and is frequently cited by real estate agents as one of the most cost-effective pre-sale upgrades.
How long does finish carpentry take in Battle Ground?
A single bedroom or bathroom takes 2–4 hours for baseboards. A single room with crown molding adds 3–5 hours depending on ceiling complexity. A full house baseboard replacement typically takes 2–4 days. A complete trim package (baseboards, crown, door casings) for a whole home takes 4–8 days. We provide a timeline at the estimate so you can plan around the project.
Do I need to remove existing trim before NORBILT installs new trim?
No — we handle removal and disposal as part of the project. We score the caulk line, pull the existing trim, check the wall for damage or out-of-square conditions, and install the new profile. Disposal of old trim is included unless the scope is unusually large. If you want to reuse existing trim in a different area of the house, let us know at the estimate.
Licensed in Battle Ground — WA Lic. NORBI**741CS
Get a Free Finish Carpentry Estimate in Battle Ground
We measure the space, count the linear footage, and give you a flat written price — baseboards, crown molding, casings, or the whole house. Same-week estimates for Battle Ground homeowners.